W
u
u
Y
A

Open Source

WuuYA aGrow

selfwatering seedpots

WuuYA aGrow makes seeding easy.

The Grid Pots can be made in different sizes all you need them.

openSCAD Gridpots:


$fs = 0.01;
$fn = $preview ? 32 : 64;

breite_x = 150;
breite_y = 110;
anz_x = 5;
anz_y = 4;
one_rund = 4; 
dicke = 1.6;
hohe = 25;
hohe_under = 5;
verangung = 6;
underset = 5;
bed_hohe = 1;
one_x = breite_x / anz_x;
one_y = breite_y / anz_y;


module onecup(verang) {
    offset(r = one_rund) {
        square([one_x - (2 * one_rund)-verang, one_y - (2 * one_rund)-verang], center = true);
    }
}

module one(){
    difference() {
        union(){
            hull(){
            linear_extrude(0.01)onecup(0);
            translate([0,0,hohe])linear_extrude(0.01)onecup(verangung);
            }
            linear_extrude(bed_hohe)square([one_x , one_y ], center = true);
    }
    hull(){
        linear_extrude(0.01)onecup(dicke);
        translate([0,0,hohe])linear_extrude(0.01)onecup(verangung+dicke);
    }
    }
    
    
    translate([0,0,hohe])difference() {
        union(){
            hull(){
            linear_extrude(0.01)onecup(verangung);
            translate([0,0,hohe_under])linear_extrude(0.01)onecup(verangung+dicke+hohe_under);
            }
    }
    hull(){
        linear_extrude(0.01)onecup(dicke+verangung);
        translate([0,0,hohe_under])linear_extrude(0.01)onecup(verangung+dicke+dicke+hohe_under);
    }
    }
    
}


module arrange_cups() {
    for (i = [0 : anz_x - 1]) {
        for (j = [0 : anz_y - 1]) {
            translate([i * one_x, j * one_y, 0]) one();
        }
    }
}
difference(){
arrange_cups();

    linear_extrude(bed_hohe)difference(){
        translate([breite_x/2-(one_x/2),breite_y/2-(one_y/2)])square([breite_x+0.1, breite_y+0.1], center = true);
    translate([breite_x/2-(one_x/2),breite_y/2-(one_y/2)])offset(r = one_rund) {
            square([breite_x-one_rund-one_rund+0.1, breite_y-one_rund-one_rund+0.1], center = true);
        }
    }
}


openSCAD watersticks:



$fs = 0.01;
$fn = $preview ? 32 : 64;




breite_x = 150;
breite_y = 110;
anz_x = 5;
anz_y = 4;
spalt = 5;
hohe_bed = 1;
rund = 15;
one_rund = 2;
dicke = 1.6;
hohe = 25;
hohe_under = 5;
verangung = 6;
underset = 5;
bed_hohe = 1;
one_x = breite_x / anz_x;
one_y = breite_y / anz_y;



module boden(){
    difference(){
        cube([breite_x,breite_y,hohe_bed]);
        aussenecken();
        translate([spalt+(spalt/2),spalt+(spalt/2),-1])hull() {
            translate([breite_x-(spalt*3),0,0]) cylinder(hohe_bed+3,d=spalt);
            cylinder(hohe_bed+3,d=spalt);
        }
        translate([spalt+(spalt/2),breite_y-(spalt+(spalt/2)),-1])hull() {
            translate([breite_x-(spalt*3),0,0]) cylinder(hohe_bed+3,d=spalt);
            cylinder(hohe_bed+3,d=spalt);
        }
    }
}
translate([-one_x/2,-one_y/2,0])boden();


module onecup(verang) {
    offset(r = one_rund) {
        square([one_x - (2 * one_rund)-verang, one_y - (2 * one_rund)-verang], center = true);
    }
}

module one(){
    hull(){
        linear_extrude(0.01)onecup(verangung+verangung+dicke+dicke+hohe_under);
        translate([0,0,hohe])linear_extrude(0.01)onecup(verangung+verangung+dicke+dicke+hohe_under);
    }
    
    
}


module arrange_cups() {
    for (i = [0 : anz_x - 1]) {
        for (j = [0 : anz_y - 1]) {
            translate([i * one_x, j * one_y, 0]) one();
        }
    }
}
difference(){
arrange_cups();

    linear_extrude(bed_hohe)difference(){
        translate([breite_x/2-(one_x/2),breite_y/2-(one_y/2)])square([breite_x+0.1, breite_y+0.1], center = true);
    translate([breite_x/2-(one_x/2),breite_y/2-(one_y/2)])offset(r = one_rund) {
            square([breite_x-one_rund-one_rund+0.1, breite_y-one_rund-one_rund+0.1], center = true);
        }
    }
}


module ausenecke(rotate){
    rotate([0,0,rotate]){
        difference(){
            cube([rund/2,rund/2,hohe_bed+1]);
            translate([rund/2,rund/2,-1])cylinder(hohe_bed+3,d=rund);
        }
    }
}

module aussenecken(){
    translate([0,0,-0.01]){
    ausenecke(0);
    translate([breite_x,0,0]) ausenecke(90);
    translate([breite_x,breite_y,0]) ausenecke(180);
    translate([0,breite_y,0]) ausenecke(270);}
}
Contact / Impressum
Page Admin-Edit-Save

Save as HTML
TEXT
News
In-Item Style / CSS
test
Item Style / CSS
test
In-Item Class
test
Item Class
test
Link to Iframe Video
https://www.youtube.com/embed/X00FOj8XUMY?mute=1
SEO Text for Iframe
Titel
Picture URL in Iframe Video
https://wuuya.net/_webpage/_c_002/youtubetub.jpg
SEO Text for Picture
WuuYA Tree
News
News
Link / URL
https://wuuya.net/news/
ADD
Image URL
https://wuuya.net/news/